MARSURF XC 20 MIT PCV 200 CONTOUR MEASURING STATION
- Mô tả
- Đánh giá (0)
Mô tả
MARSURF XC 20 MIT PCV 200 CONTOUR MEASURING STATION
- This finely tuned device configuration offers superb performance standards
- The drive unit and measuring stand are controlled and positioned via the measuring and evaluation software
- User prompts can be displayed
- Interactive control elements support evaluations and automatic routines
- Measurement of upper and lower contours with a twin stylus probe
– Relative evaluation of the two contours is made possible - Profile section images with evaluation of different parameters for each section
- Segmented measurement is possible across obstacles such as bores or steep sides
- Import and export of DXF files supported for setpoint/actual value comparison
- PCV 200 drive unit with patented probe arm magnetic attachment for reproducible probe arm change
- Patented probe system for measuring station flexibility
- Manually variable tracing forces support flexibility
- Synthetic creation of nominal profiles from straight lines and circle arcs
- Easy comparison of nominal and actual profiles
– Different tolerances can be selected by description within a profile
Thông số kỹ thuật máy đo biên dạng MARSURF XC 20
|
Resolution
|
In Z, relative to stylus tip: 0.38 µm (350 mm probe arm) / 0.19 µm (175 mm probe arm)
In Z, relative to measuring system: 0.04 µm |
|---|---|
|
Sampling angle
|
On smooth surfaces, depending on deflection: trailing edges up to 88°, leading edges up to 77°
|
|
Start of traversing length (in X)
|
0.2 mm
|
|
Tip radius
|
25 µm
|
|
Contacting speed (in Z)
|
0.1 to 1 mm/s
|
|
Probe arm length
|
175 mm, 350 mm
|
|
End of traversing length (in X)
|
200 mm
|
|
Positioning speed
|
In X and return speed: 0.2 to 8 mm/s
In Z: 0.2 to 10 mm/s |
|
Guide deviation
|
< 1 µm (over 200 mm)
|
|
Measuring speed
|
0.2 mm/s to 4 mm/s
|
|
Measuring range mm
|
(in Z) 50 mm
|
|
Traversing lengths
|
0.2 mm to 200 mm
|
|
Measuring force (N)
|
1 mN to 120 mN, below and above (can be set in MarSurf XC 20)
|
Để liên hệ tư vấn về các loại linh kiện khuôn mẫu như chốt dẫn hướng, lò xo, chốt hồi, vít bịt, bu lông kéo, vòng định vị, bạc cuống phun, bạc dẫn hướng … giá tốt nhất cùng với dịch vụ service chất lượng tốt nhất thị trường Việt Nam.
Luôn sẵn tồn kho lớn – giao hàng ngay!
ĐÔNG DƯƠNG EQUIPMENT CO.,LTD – Hotline : (024)7300.1868 – Email : info@thietbidongduong.com
Địa chỉ: Số 124 Lê Trọng Tấn, P.La Khê, Q. Hà Đông, TP. Hà Nội
Đánh giá
Chưa có đánh giá nào.